KTM 1290 Super Adventure, Руководство пользователя

Страница: 147 / 262

13 SERVICE WORK ON THE CHASSIS
145
13.24 Cleaning the dust boots of the fork legs
Preparatory work
–
Raise the vehicle with the center stand. ( p. 113)
–
Remove the front fender. ( p. 144)
310659-10
Main work
–
Push dust boot  of both fork legs downwards.
Info
The dust boots should remove dust and coarse dirt particles from the fork tubes.
Over time, dirt can penetrate behind the dust boots. If this dirt is not removed,
the oil seals behind can start to leak.
Warning
Danger of accidents Reduced braking efficiency due to oil or grease on the
brake discs.
–
Always keep the brake discs free of oil and grease, and clean them with
brake cleaner when necessary.
–
Clean and oil the dust boots and inner fork tube of both fork legs.
Universal oil spray ( p. 247)
–
Press the dust boots back into their normal position.
–
Remove excess oil.
Finishing work
–
Install the front fender. ( p. 144)
–
Remove the vehicle from the center stand. ( p. 113)