KTM 1290 Super Adventure S 2018 Скачать руководство пользователя страница 48

Страница: 48 / 348

6 CONTROLS

Warning

Danger of poisoning

Fuel is poisonous and a health hazard.

–

Avoid skin, eye and clothing contact with fuel.

–

Immediately consult a doctor if you swallow fuel.

–

Do not inhale fuel vapors.

–

In case of skin contact, rinse the affected area with plenty of water.

–

Rinse the eyes thoroughly with water, and consult a doctor in case of fuel contact with the eyes.

–

Change your clothing in case of fuel spills on them.

–

Keep fuels correctly in a suitable canister, and out of the reach of children.

Warning

Environmental hazard

Improper handling of fuel is a danger to the environment.

–

Do not allow fuel to enter the groundwater, the soil, or the sewage system.

Condition

The motorcycle is stationary.
The engine is off.
The ignition has been switched on or off for less than 1 minute.

Содержание 1290 Super Adventure S 2018





























































































































































































































































































































































Результаты поиска

Содержание 1290 Super Adventure S 2018

Отзывы:

KTM 1290 Super Adventure S 2018, Руководство пользователя, Страница: 48 / 348

Результаты поиска

Содержание 1290 Super Adventure S 2018

Отзывы: