KTM 1290 Super Adventure S 2018 Скачать руководство пользователя страница 47

Страница: 47 / 348

CONTROLS 6

6.18

USB socket

F00974-10

A USB socket

is located in the storage compartment for sup-

plying power to external devices.
The USB socket is activated when the ignition is switched on.

USB socket

Voltage

5 V

Maximum cur-
rent consump-
tion

2.1 A

6.19

Opening the filler cap

Danger

Fire hazard

Fuel is highly flammable.

The fuel in the fuel tank expands when warm and can escape if overfilled.

–

Do not refuel the vehicle in the vicinity of open flames or lit cigarettes.

–

Switch off the engine for refueling.

–

Make sure that no fuel is spilled; particularly not on hot parts of the vehicle.

–

If any fuel is spilled, wipe it off immediately.

–

Observe the specifications for refueling.

Содержание 1290 Super Adventure S 2018





























































































































































































































































































































































Результаты поиска

Содержание 1290 Super Adventure S 2018

Отзывы:

KTM 1290 Super Adventure S 2018, Руководство пользователя, Страница: 47 / 348

Результаты поиска

Содержание 1290 Super Adventure S 2018

Отзывы: