KTM 1090 Adventure R 2018, Инструкции по установке

Страница: 5 / 23

SETUP 2
3
2.1 Unpacking and setting up the vehicle
S01880-10
–
Remove the straps and box.
A00227-10
–
Remove the adhesive tape in the upper area of the motorcycle.
A00228-10
–
Roll down the film at the sides.
Info
To avoid damaging the motorcycle during unpacking,
leave the other films on the vehicle until you have fin-
ished work on the vehicle.
–
Remove the separate enclosure and unpack it. Check the sepa-
rate enclosure for completeness.
–
Check the vehicle for transport damage.
A00229-10
–
Remove the controls from the transport holder.
–
Remove the screws and handlebar clamps.
–
Remove the transport holder.
S01881-10
–
Remove the right hand guard.
–
Position the controls on the right half of the handlebar.
Tighten the screws.
Guideline
Screw, combination
switch, right M5 3.5 Nm
(2.58 lbf ft)
Remaining chassis
screws M6 10 Nm (7.4 lbf ft)
The catch on the combination switch engages in the
recess of the mirror clamp.
–
Mount the right hand guard.