6
ENGLISH
- Remove left turn signal
(green) and right turn signal
(gray)
from original license plate holder and mount and fi rmly tighten to
license plate holder
(supplied).
- Position the license plate holder
.
- Mount and fi rmly tighten screws
(supplied) with original nuts
.
- Thread in and connect cable for license plate lamp
(red), left
turn signal
(green) and right turn signal
(gray).
NOTE:
Properly route all cables and
ensure that the cables cannot be bent
or pinched.
- Fit cable binders
(supplied) to adhesive bases
(supplied).
- Fix all cables with cables
.
- Fix both adhesive bases
to the rear subframe.
Final steps
- Install the passenger seat (see the Owner’s Manual).
- Install the driver’s seat (see the Owner’s Manual).
- Check lighting system.
Warning
Danger of accident
If the lighting system fails you are invisible to the road user
following .
Check the lighting system.
