LX1-1.1.2: D 03.06
9 / 14
5.4. Frame A & Hook
1) Apply (G1) grease to the following parts:
Refer to Figure 5-11.
The hole rim for (16) Pinion in (10) Frame A or the equivalent section on the pinion
The hole rim for (18) Load Sheave in (10) Frame A or the equivalent section on the
sheave
The hole rim for (24) Guide Roller in (10) Frame A or the equivalent section on the roller
2) Align Frame A with (16) Pinion, (18) Load Sheave, (24) Guide Roller, (15) Stud A, (14) Stud B
and (25) Stripper, and attach them as shown in Figure 5-11.
Figure 5-11 Frame A Attachment
3) Attach (1) Top Hook Set between (10, 11) Frame A and B and insert (26) Top Pin into the
hole for the hook in Frame A. Refer to Figure 5-13.
End of Pawl Spring
(23) Pawl Spring Assembly
Figure 5-12 Pawl Spring Assembly
4) Put the end of one pawl spring through the coiled part of the other pawl spring and fit each
other into (23) Pawl Spring Assembly as shown in Figure 5-12.