-11-
3. Making Network Connections
3.1 Switched Ports
The following figure shows the locations of the switched ports:
3.2 Making UTP Connections
10/100 TP Port Configuration
All 10/100 TP ports support configuration as follows:
Auto-negotiation capable
Highest capability : 100M Full duplex
Speed : auto-sensing for 100Mbps or 10Mbps
Duplex : Full duplex, Half duplex
Auto MDI-X function
The following table lists the configuration used for the 10/100 port when
it connects to different devices:
Connected Device
Configuration Used
10BASE-T hub port
10Mbps, half-duplex
100BASE-TX hub port
100Mbps, half-duplex
Auto-negotiation port
Determined via auto-negotiation process
Non-auto*1 half-duplex port
auto-speed-sensing *2, half-duplex
Non-auto full-duplex port
Not supported
*1 Non-auto : non-auto-negotiation
*2 speed is determined by auto-sensing function
