-6-
Installation
Unpacking
The product package contains:
The power supply unit
One DC plug cable
DIN-Rail mounting bracket
One product CD-ROM
One AC power cord
Safety Cautions
To reduce the risk of bodily injury, electrical shock, fire and damage to the product, observe the following
precautions.
Do not service any product except as explained in your system documentation.
Opening or removing covers may expose you to electrical shock.
Only a trained service technician should service components inside these compartments.
If any of the following conditions occur, unplug the product from the electrical outlet and replace the part
or contact your trained service provider:
- The power cable, extension cable, or plug is damaged.
- An object has fallen into the product.
- The product has been exposed to water.
- The product has been dropped or damaged.
- The product does not operate correctly when you follow the operating instructions.
Do not push any objects into the openings of your system. Doing so can cause fire or electric shock by
shorting out interior components.
Operate the product only from the type of external power source indicated on the electrical ratings label. If
you are not sure of the type of power source required, consult your service provider or local power
company.
For pluggable equipment, the socket-outlet shall be installed near the equipment and shall be easily
accessible.
An approved power supply cord not lighter than IEC 60227, H03VV-F, 3G, 0.75mm
2
or alternatively IEC
60245, H05RR-F, 3G, 0.75mm
2
.
