KTI Networks KGS-810F, Руководство пользователя

Страница: 17 / 70

-17-
2.9 LED Indication
LED Function State Interpretation
POWER Power status ON The power is supplied to the switch.
OFF The power is not supplied to the switch.
MGT Management status OFF The switch is in initialization.
ON The switch is initialized completely.
LNK/1000M/ACT Port link status ON A 1000Mbps link is established. (No traffic)
BLINK Port link is up and there is traffic.
OFF Port link is down.
LNK/100M/ACT Port link status ON A 100Mbps link is established. (No traffic)
BLINK Port link is up and there is traffic.
OFF Port link is down.
LNK/10M/ACT Port link status ON A 10Mbps link is established. (No traffic)
BLINK Port link is up and there is traffic.
OFF Port link is down.
FX8 FX8 status OFF RJ-45 copper connection is selected on Port 8.
ON SFP fiber connection is selected on Port 8.
2.10 Configuring IP Address and Password for the Switch
The switch is shipped with the following factory default settings for software management:
Default
IP address of the switch: 192.168.0.2 / 255.255.255.0
The IP Address is an identification of the switch in a TCP/IP network. Each switch should be designated a new
and unique IP address in the network. Refer to Web management interface for System Configuration.
The switch is shipped with factory default password
123 for software management.
The password is used for authentication in accessing to the switch via Http web-based interface. For security
reason, it is recommended to change the default settings for the switch before deploying it to your network.
Refer to Web management interface for System Configuration.