After choosing the
<Run Diagnostics on Board>
item, the
screen will display like,
Node ID........: 00 e0 7d c0 00 01
Network Speed..: 100Mbps
I/O Base ......: E000H
Interrupt .....: 11
Full-Duplex ...: Disabled
Pass Count Fail Count
A.
I/O Register
B.
100Mbps Loopback
C.
10Mbps Loopback
D.
Cable Connection
<Cable Connection>
test reminds you that the connection
link might be fail, either the cable is not connected or the
cable link fails.
For the
<Run Diagnostics on Network>
test, it is
necessary to connect your computer with its supporting hub
or another computer. This is a "Ping-Pong" test. This test
cannot be completed except two computers on the LAN for
sending or receiv ing the test packets between computers.
For the
<Run Diagnostics On Network>
test
Master Machine: Master machine sends magic packet or
Wake up frame through the network.
Target Machine: Target machine is notified whenever a
qualified wakeup packet is received.
Network
Ethernet Address
00E07DC00002
Target Machine
Ethernet Address
00E07DC00001
Master Machine
