2. Installation
This section describes how to install the adapter. For
connecting to the network, you must have the following:
1.
Network adapter card installed to your computer.
2.
Cabling (compatible with network topology)
3
. Connect the Wake-On-LAN cable to the motherboard (If
the WOL function is supported on the adapter)
4.
Software for the adapter card contains both configuration
utilities and drivers
2.1 Unpack and Inspect
Caution:
Under ordinary circumstances, this adapter card
will not be affected by static charge as may be
received through your body during handling of the
unit .In special circumstances where you may
carry an extraordinarily high static charge, it had
better reduce the charge by touching a ground
before handling the adapter card.
Open the shipping gift box and carefully remove all items. In
addition to this User’s Manual, please check the following
items:
Ÿ
One 10/100 Fast Ethernet PCI Adapter Card
Ÿ
One WOL cable (If adapter supports WOL function)
Ÿ
One 3.5” Drivers and Utilities
diskette
Ÿ
This user’s Manual
Note:
If any of the listed items are missing, please
contact your distributor or reseller
