18
2.6 Making TP Port Connection
TP port is featured to support connection to:
Auto-negotiation devices
Auto-negotiation incapable 10BASE-T devices
Auto-negotiation incapable 100BASE-TX devices
Network Cables
10BASE-T:
4-pair UTP Cat. 3,4,5 , EIA/TIA- 568 100-ohm STP
100BASE-TX:
4-pair UTP Cat. 5, EIA/TIA-568 100-ohm STP
Link distance:
Up to 100 meters
Configuration Setup
To make a proper connection, the following configuration settings are recommended:
TP port link partner
SW1
SW2
SW3
Auto-negotiation device
Off: auto
Off: full duplex
Off: 100M
Fixed 10M half duplex device
On: forced
On: half duplex
On: 10M
Fixed 100M half duplex device
On: forced
On: half duplex
Off: 100M
Fixed 10M full duplex device
On: forced
Off: full duplex
On: 10M
Fixed 100M full duplex device
On: forced
Off: full duplex
Off: 100M
