4 / 4
Pressing in fit of Joint Plate
Outer Bolt
Handle
Outer Bolt
Outer Bolt
Outer Bolt
Outer Bolt
Chain
Joint pin
Joint pin
Handle
Caulking pin
Press Fit Plate
Press Fit Plate
Caulking pin
Press fit plate
Until hitting
Until hitting
⑤ Place Handle onto Outer Bolt, and tighten it until both
ends of the Press fit plate hit the next plate.
・
Spreading too thin causes cracks.
・
This product is for Flare caulking exclusive use. Cannot use for Cruciform caulking.
・
③ Place Joint pin on the centre of Press Fit Caulking Receival Plate,
and make the pinpoint of Caulking pin and Joint pin stick together by
tightening Outer Bolt by hand.
① Uninstall the press fit plate is used when pressing in. Use Press
Fit Caulking Receival Plate as Caulking Receival Plate.
② Install Caulking pin on edge of Outer Bolt .
④ Place Handle onto Outer Bolt, and tighten it until
the point of the joint pin extends.
Caulking condition