3 / 4
Chain
Cutting Receival plate
④ Tighten Inner Bolt with3/8
”
sq.rachet handle etc. and
remove Chain pin.
SPARE PARTS
Though the product number of any parts of this page is
GOD-XXXX,
“
GOD-
“
is omitted to save space in the picture.
Pressing in of Joint Plate
Outer Bolt
Inner Bolt
Inner Bolt
Chain
Chain
Chain
Outer Bolt
Inner Bolt
Outer Bolt
Press Fit Caulking
Receival Plate
3/8
”
sq. Ratchet handle
3/8
”
sq. Ratchet handle
Outer Bolt
For cutter
guide 4050
Cutter Receival Plate
Outer Bolt
Outer Bolt
Outer Bolt
Joint Plate
Joint pin
Press Fit Plate
Press Fit Caulking
Receival Plate
Press Fit Plate
Cutter Receival
Plate
Roller Ring
Be careful not too tight when pressing in.
③ Tighten the Outer Bolt by fingers, and maintain the pin
of the chain which is cut with the hole part of the Main
body Cutting Receival Plate and the hole part of For cutter
guide 4050.
③ Tighten Inner Bolt with3/8
”
sq.rachet handle etc. and
remove Chain pin.
② Tighten the Outer Bolt by fingers, and maintain the pin
of the chain which is cut with the hole part of the Main
body Cutter Receival Plate and the hole part of the Outer
Bolt.
①Remove Inner Ｂｏｌｔ and in case of 40, 50, remove Inner
Bolt For Cutter guide 4050 which is used when cutting.
③Apply grease etc. to the depressed portion of
Press fit plate, and put Joint Plate on it.
②. Install Press Fit Caulking Receival Plate on Main body,
and suitable Press fit plate for chain on Outer Bol.
Adaptation size
④Connect Chain to Joint Pin, and fit the back of the
Joint Pin into the depressed portion of Press Fit
Caulking Receival Plate. Then, Tighten Outer Bolt by
fingers and make sure that Joint Pin and the hole of
the Joint Plate are fitted.