Copyright © 1997-2009 KT&C Co., Ltd. All Rights Reserved.
Korea Technology & Communications Co., Ltd.
51
KVS-1000 User’s Manual
Advanced > Advanced Network
This section describes advanced network settings.
1.
Host Name Setting
Host Name – The Network Camera can be accessed using a host name instead of an
IP address. The host name is usually the same as the assigned DNS name. It is
always the first part of a fully qualified domain name and is always one word, with
no period.
2.
DNS Setting
A.
Primary DNS - Enter the IP address of the primary DNS server. This server provides
the translation of host names to the IP addresses on your network.
B.
Secondary DNS - Specify the IP address of the secondary DNS server. This will be
used if the primary DNS server is unavailable.
Note:
When setting up the Network Camera to use DHCP servers for obtaining network settings, the Network
Camera will automatically look up and use the DNS server settings as provided by DHCP.
3.
NTP Setting
NTP Server Address – Enter the NTP server’s IP address or host name.