KT&C HDI28V12IRM, Инструкции по эксплуатации

Страница: 19 / 25

11. OSD FUNCTION DESCRIPTION
1. LENS
- LENS TYPE:
> Enables user to set the Automatic Light Control.
(DC IRIS Lens)
> Enables user to set the Electronic Level Control.
(Board Lens)
- LENS MODE:
Enables user to set the Environment that is installed.
(Indoor or Outdoor)
2. EXPOSURE
- BRIGHTNESS:
Enables user to control the image brightness (1~20steps).
- SHUTTER MODE:
Enables user to set the Shutter Mode.
-> AUTO, MANUAL, FLICKER
- SHUTTER SPEED: Enables user to set the
Shutter Speed. -> 1/30(25), 1/60(50), 1/120(100), 1/250,
1/500, 1/1K, 1/2K, 1/4K, 1/8K, 1/16K, 1/30K
*() is for digital output frame rate 25 or 50
- DSS(Digital Slow Shutter): Enables user to set
the DSS Level.
-> OFF, X2, X3, X4, X5, X6, X7, X8, X16, X32
- AGC MAX: Enables user to make the imager brighter by amplifying the Gain (12~60dB).
- INITIAL: Enables user to reset the Exposure menu set up.
3. WHITE BALANCE
Enables user to represent white accurately by
controlling the RGB levels.
- WB MODE
1. AUTO: Enables user to trace the White
Balance automatically in the range of 2,300K~10,000K.
2. PUSH LOCK: Enables user to adjust the
White Balance according to the color temperature of
the environment.
3. MANUAL: Enables user to sets the White Balance
according to the circumstance.
4. AUTO EXT: Extended auto mode for special illumination.
- CHROMA: Enables user to set the Color Gain (0~20steps).
- KELVIN: In the MANUAL setting of WB MODE, enables user to set the color
temperature range.
- RED GAIN: In the MANUAL setting of WB MODE, enables user to set the RED GAIN.
- BLUE GAIN: In the MANUAL setting of WB MODE, enables user to set the BLUE GAIN.
- PUSH AUTO: In the PUSH LOCK setting of WB MODE, enables user to fix the White
Balance in camera setting.
- INITIAL: Enables user to reset the WHITE BALANCE menu setting.
19