KT&C HDI28V12IRM, Инструкции по эксплуатации

Страница: 20 / 25

4. WDR/BLC
- MODE: Enables user to set WDR/BLC mode. -> OFF, WDR, BLC
1. WDR(Wide Dynamic Range): For use in conditions were BLC is not sufficient to
produce a clean image, such as in lobbies and places surrounded by windows.
2. BLC(Backlight Compensation): This function helps make subjects visible in backlit
conditions.
- WDR LEVEL: Enables user to set WDR Level (0~4 level).
- BLC X-POSITION: Enables user to set Vertical start position (0~20steps).
- BLC Y-POSITION: Enables user to set Horizontal start position (0~20steps).
- BLC X-SIZE: Enables user to set Vertical size (0~20steps).
- BLC Y-SIZE: Enables user to set Horizontal size (0~20steps).
- INITIAL: Enables user to reset the WDR/BLC setting.
5. DAY&NIGHT
Conversion of output image to COLOR / BW depending on exterior environment.
- D&N MODE
1. COLOR: Enables user to set the image to color mode.(Standard type)
2. B/W: Enables user to set the image to B/W mode.(Standard type)
3 AUTO: Enables user to convert to COLOR/BW automatically by luminance
element on Screen(Standard type) or photocell (LED Type)
- DWELL TIME: In D&N MODE AUTO, enables user to set a delay when changing
COLOR/BW (1~10sec)(Standard Type).
- DAY->NIGHT: Sets threshold for switching from Day to Night.(Standard Type)
- NIGHT->DAY: Sets threshold for switching from Night to Day.(Standard Type)
- IR OPTIMIZER: By the IR LED light, the screen is saturated,
and automatically adjust the brightness, so you can see the screen. (LED Type)
- IR OPT. LEVEL: Enable user to set up IR OPTIMIZER level (0~15 level) (LED Type)
- INITIAL: Enables user to reset the DAY&NIGHT menu.
20