KT-Elektronik SOL3-3, Инструкция по установке и эксплуатации, Страница: 12 / 88

Installation and operating manual KT-Elektronik
1.5 Adjust usage schedule settings
There are three separate usage schedules for
•
Auxiliary heating
•
Domestic water circulation
The following applies to each time program:
For each day of the week, three time ranges can be programmed. If only one time range
is needed, the start and end time of the second range have to be set to the same value.
The third range will then not be shown any more. If only two time ranges are needed, the
start and end time of the third range have to be set to the same value.
The time ranges for the control circuits are adjusted by means of their identification
numbers shown in the display:
3
Auxiliary heating
3
Domestic water circulation
Setting FS* Value range
Time range/day 1–7 1–7, 1, 2, 3, 4, 5, 6, 7, for which 1–7 = daily,
1 = Monday 2 = Tuesday, ..., 7 = Sunday
Beginning of first time range 06:00 00:00 to 24:00 hours; 15 minute increments
End of first time range 22:00 00:00 to 24:00 hours; 15 minute increments
Beginning of second time range 22:15 00:00 to 24:00 hours; 15 minute increments
End of second time range 22:15 00:00 to 24:00 hours; 15 minute increments
Beginning of third time range – 00:00 to 24:00 hours; 15 minute increments
End of third time range – 00:00 to 24:00 hours; 15 minute increments
* Factory default settings valid for heating circuit
12
EB_37383_SOL3-3_EN002