Installation and Operation Manual 38
2. Clean the dust inside the holes, and insert expansion bolt into the
holes. Make the expansion pipe into the wall, screw the bolt, take
the formwork, aimed at the hole, then tighten by pipe.
3.
Hang the inverter to formwork form the top to bottom, check both
sides and keep the inverter in the right position, and tighten screw.
Figure 15
8.2.7 Ambient requirement
Attention!
The scope of ambient is -25°C to +60°C. Meanwhile, no
direct sunlight for KSG-12K inverter should be satisfied, or
the high temperature can influence the generated energy.
Warning!
Don’t place KSG-12K inverter with inflammable
materials.
Warning!
The temperature of some parts of KSG-12K inverter is
very high. Avoid contacting with them.
Hang and fix the inverter
