KStar KSG-1.5K-SM, Руководство пользователя, Страница: 28 / 31

Installation and Operation Manual 27
Over
Temperature
Fault
(1) Inverter’s temperature too high, put the inverter in cooling
place.
(2) If fault still occurs, please contact distributor.
Relay Fault
(1) Restart the equipment and check whether faulty still exists
(2) If fault still exists, please contact distributor.
DCI Fault
(1) DC component in output current too high, wait for 2
minutes after alarm occurs, and check whether the
inverter can be automatically recovered itself.
(2) If faulty still occurs, please contact distributor.
EEPROM I/O
fault
(1) Restart the equipment and check whether faulty still exists
(2) If fault still exists, please contact distributor.
BUS Over
Voltage
(1) Restart the equipment and check whether faulty still exists
(2) If fault still exists, please contact distributor.
Equipment
Fault
(1) Restart the equipment and check whether faulty still exists
(2) If fault still exists, please contact distributor.