4.
Aggregator page (Serial port over TCP/IP)
This device is to be deemed as a slave to be inquired by Master and return data to Master.
4.1 Modbus/TCP section:
4.1.1 Listener Port: This device is set with a TCP/IP socket port 502. Serial port #1 to be ID 1, Serial
port #2 to be ID 2.
4.1.2 TCP inactive timeout: If no data stream via TCP transmission during the time period, watchdog
will be active to reboot device.
4.1.3 RTU response timeout: Time setting for RTU data response.
4.1.4 Fetch Retry: Device will inquire data from RTU and retry. An ERROR will be issued when got
no response from RTU after number of times.
4.2 Port 1 or Port 2 section:
4.2.1 Slave ID: assign the ID number
