Ksenukai FXAM1H-ZP2-1-250E Скачать руководство пользователя страница 16

Страница: 16 / 136

PARTS LIST (FIG 3)

UNPACKING
Caution!

This packaging contains sharp objects. Take

care when unpacking. Remove the machine, together
with the accessories supplied, from the packaging.
Check carefully to ensure that the machine is in good
condition and account for all the accessories listed in
this manual. Also make sure that all the accessories
are complete. If any parts are found to be missing, the
machine and its accessories should be returned
together in their original packaging to the retailer.

Do not throw the packaging away, keep it safe
throughout the guarantee period, then recycle if
possible, otherwise dispose of it by the proper means.
Do not let children play with empty plastic bags due
to the risk of suffocation.

ASSEMBLY

To assemble this saw you will need: Cross head
screwdriver, 8mm & 10mm spanner or socket wrench,
13mm Socket wrench, 5mm allen key and a rubber
mallet.

Unpack all components including fixings and
familiarise yourself with them before attempting to
assemble the machine. Enlist competent help when
assembling this machine. Use the rubber mallet to aid
assembly.

Warning!

This machine is heavy. Enlist competent

help when moving or lifting this machine.

STEP 1

Select the components labelled 23 and 31. Attach 31
to 23 using the fixings 3,4 & 5 (Fig.4). Make sure the
spacer (5) is between components 23 & 31 and the
bolt (3) is on the outside and the nut (4) on the inside.
Repeat on the other side.

STEP 2

Attach component 20 to the outside of 23 using the
fixings labelled 3, 4 and 5. Make sure the spacer (5) is
between components 20 & 23 and the bolt (3) is on
the outside and the nut (4) on the inside. Do not over
tighten. Repeat on the other side. (Fig.5).

STEP 3

Select the components labelled 17 and 25. Attach 25
to 17 using the fixings 10 and 12 (Fig.6).

STEP 4

Attach the two components that have been
assembled in Steps 1-3 using the fixings labelled 3, 4
and 5. Make sure the spacer (5) is between
components 20 & 17 and the bolt (3) is on the outside
and the nut (4) on the inside. Do not over tighten.
Repeat on the other side. (Fig.7 & 8).

STEP 5

Attach the bottom of component 17 to the outside of
component 31 using the fixings labelled 3, 4 and 5.
Make sure the spacer (5) is between components 20 &
31 and the bolt (3) is on the outside and the nut (4) on
the inside. Do not over tighten. Repeat on the other
side. (Fig.9).

STEP 6

Attach the wheels 29 to their service position on
component 17 (Fig.10) using fixings 13,14,15 & 16. Do
not over tighten the wheels, as this will prevent them
from moving freely.

STEP 7

Select the components labelled 20 and 22. Attach
component 22 to 20 using the fixings labelled 11 and
12 (Fig.11 & 12).

STEP 8

Place the flat end caps (1) in the positions shown in
Fig.13-15. Repeat on the both sides of components
17, 20 & 23.

STEP 9

Place the round end caps (2) into the end component
23 (Fig.16). Repeat on the other side.

STEP 10

Turn the main body of the machine upside down and
place on a clean, secure and sturdy workbench or
similar.

Position the leg assembly onto the main body of the
machine (Fig.17).

Attach the leg assembly to the machines main body
using fixings 6,7,8 & 9 (Fig.18). Repeat this process on
all 4 corners.

Enlist competent help in turning the table saw over.

Ensure the locking latch is locked into place before
using, Fig.19.