44
EN
MODIFY
ENROLL AND MODIFY A REMOTE COMMAND
At this point it is possible to modify the configuration of a detector enrolled to the
system.
Please proceed as follow:
• from
Wireless Detectors
point, press ENTER and browse the menù till
Modify
. Press ENTER to confirm
• the display presents the serial number and the kind of the first enrolled detector.
e.g. the starting screen will be:
In case of no enrolled detectors, the screen will shows:
By pressing ENTER or ESC, you return to
Wireless
Detectors
menù
When the first detector is shown on display, it is possible to browse all the
enrolled detectors using the circular scroll. Once select the detector you want to
modify, press ENTER to confirm. Depending on the kind of detector, you access
to its programming sub-menù, that is the same as the one described in ‘
Enroll
’
paragraph.
If you press ESC while visualize a detector, you return to
Modify
point on
Wireless
Detectors
menù.
On this paragraph the procedure to manage the
opera
remote commands
enrolled in the system is described. Once in programming menù, browse till the
following screen using the circular scroll:
By pressing ENTER you access to the programming sub
-menù Remote Commands on which these functions are
available:
ENROLL
At this point it is possible to enroll a remote command.
To enroll a remote command, please proceed as follow:
• from
Remote Commands
, press ENTER and browse the menù till
Enroll
using the
circular scroll. Press ENTER to confirm.
Modify
poli 024365
Modify
No Detectors
Programming
Remote Commands
