EN
29
WIRING
ERGO KEYPAD
AUXI \ AUXI RELÈ
duo universal
can be connected to the
ergo
keypad by 2 different ways:
1.
Using the programming cable (
KSI7500000.000
) to connect with the BUS
connecting strip
2.
Connecting the BUS terminals:
+ A B -
You can connect
auxi
/
auxi relay
modules to the universal duo by the BUS
terminals:
+ A B -
TERMINALS
FACTORY DATA RESTORE
+ -
A B
M1 - M2 - O3...O8
12Vdc Power Supply
KS BUS inputs
Outputs
To restore the factory data, please follow the steps here below:
1.
Open the ‘REP’ jumper
2.
Power up the device
3.
The LED
OK
,
TX
and
RX
stays lit
4.
Close the ‘REP’ jumper
Note
When in factory data, as soon as you connect the ergo keypad, it will be necessary to set the language.
MAIN FEATURES
• Up to 18 programmable outputs: 8 built-in on
duo
, up to 2 on
auxi
/
auxi relay
,
each one with 5 programmable outputs
• Up to 32 configurable wireless detectors
• Up to 8 configurable remote commands to activate outputs or switch the system
status
• Up to 15 groups to associate one (or all) the enrolled wireless detectors. Every
group needs a corresponding output
•
ergo
keypad as programming tool and system monitor
• Programming multi-language menu
• Programming data saved on EEPROM non-volatile memory
• Default data restoral
• Status LED
