5 Installation at Site
16 of 28
Ixo-Pro
5.2 Connecting the piping
DANGER
Using damaged cables in the tank / rainwater storage tank
Electric shock!
▷
Do not kink the cable. Observe the minimum bending radius
1)
of the cable. Do
not drag the cable over sharp edges.
▷
Fasten the cable to the riser or piping with suitable fasteners (e.g. cable clips).
▷
Do not use any tools, equipment or accessories with sharp edges (e.g. sharp-
edged pipe sockets) for the installation.
WARNING
Persons falling into unsecured tanks / rainwater storage tanks
Risk of injury!
▷
Always secure open tanks / rainwater storage tanks during the entire
installation procedure to prevent persons from falling in.
▷
Suitably fence off the work area.
CAUTION
Pump set falling into the tank / rainwater storage tank
Damage to the pump set!
▷
Secure the pump set during the entire installation procedure.
▷
Dimension any securing devices (supporting clamps, supports, etc.) so that they
can carry all weights during the installation.
CAUTION
Unsuitable pipeline
Faulty operation of the pump!
▷
If using plastic pipelines, make sure they are designed to withstand the pump
pressure.
▷
Do not kink the plastic pipeline.
CAUTION
Incorrect installation
Pressure surges!
Damage to the material!
▷
Never install an additional swing check valve in the piping. The swing check
valve is already integrated in the pump set.
▷
Fit an expansion vessel to the discharge line (optional accessory: see Kit-Press
connection set).
Installation information
▪
The pumps can be connected to pipelines with an Rp 1 thread.
NOTE
Using a discharge line of a larger diameter is recommended in the case of very high
static heads or very long pipelines in order to prevent pressure losses.
1.
Install the pipelines in accordance with the manufacturer's documentation.
2.
Lower the pump set into the tank / rainwater storage tank.
