4 Description
13 of 28
Ixo-Pro
4.5 Configuration and function
Fig. 2:
Sectional drawing
1
Suction casing
2
Pump casing
3
Rotor
4
Diffuser
5
Double mechanical seal
6
Rolling element bearing
7
Stator
8
Motor shaft
9
Rolling element bearing
10
Capacitor
The fluid enters the pump via the suction casing (1). It is accelerated outward by the
rotating impellers. In the flow passage of the diffusers (4) and the pump casing (2)
the kinetic energy of the fluid is converted into pressure energy. The fluid is pumped
to the discharge side, where it leaves the pump. At the rear side of the impeller, the
motor shaft (8) enters the casing via the bearing cover. The shaft passage is sealed by
a double mechanical seal (5). The shaft is supported by rolling element bearings (6)
and (9).
4.6 Scope of supply
▪
Multistage submersible borehole pump with integrated pressure switch
▪
Motor connection cable 15 m (H07 RNF) and plug
