6 Installation at Site
26 of 36
BOA-Control/ BOA‑Control IMS
Setting and operation of BOA-Control/BOA-Control IMS balancing valves require the
use of measuring computers, as otherwise the valve cannot perform all of its
functions. Without a measuring computer, the scaled travel indicator only allows a
preliminary setting on the basis of the characteristic curves.
BOA-Control IMS can be set and adjusted by means of the BOATRONIC MS or
BOATRONIC MS-420 measuring computers. The length of the connection cable to the
sensor must not be changed without prior consultation. The cable must only be
extended using the extension cable available from KSB.
BOA-Control can only be set and adjusted by means of the BOATRONIC MS
measuring computer. The length of the connection cable to the sensor must not be
changed without prior consultation. The cable must only be extended using the
extension cable available from KSB.
The valves of the BOA-Control/BOA-Control IMS series can be used as shut-off valves.
They will then perform the functions of sealing and shutting off like any standard
shut-off valve. No particular measures with regard to sensors or measuring taps need
to be taken for this purpose.
