manualshive.com logo in svg

KSB BOA-Control PIC, Руководство по эксплуатации

Поделиться
Скачать
KSB BOA-Control PIC Скачать руководство пользователя страница 20

5 Installation at Site

20 of 36

BOA-Control PIC

7138.8/01-EN

CAUTION

Painting of the piping

Valve function impaired!

Loss of important information provided on the valve!

▷

Protect stem and plastic components prior to applying paint.

▷

Protect printed name plates prior to applying paint.

5.4 Installing the valve

CAUTION

Improper installation

Damage to the valve!

▷

Protect the body and body bonnet from any impacts.

CAUTION

Outdoor installation

Damage due to corrosion!

▷

Provide weather-proof protection to protect the valve against moisture.

CAUTION

Welding beads, scale and other impurities in the piping

Damage to the valve!

▷

Remove any impurities from the piping.

▷

If necessary, install a strainer.

1. Thoroughly clean, flush and blow through all vessels, piping and connections

(especially of new installations).

2. Check that the inside of the valve is free from any foreign objects. Remove any

foreign objects.

3. If required, install a strainer in the piping.

Threaded connection (DN 10 - 50)

The valves have male threaded ends (DN 10 - 25) or female threaded ends (DN 32 -
 50) to ISO 228 for installation in the piping.

CAUTION

Tightening the threaded connection with an unsuitable tool

Damage to the valve!

Leakage at the valve body!

Leakage of fluid!

▷

Tighten the threaded connection with an open-ended spanner only.

ü

The thread is free of dirt.

1. Always apply sealing material to the male thread of the threaded connection

only.

2. Tighten the threaded connection with an open-ended spanner.

Содержание BOA-Control PIC





































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды