manualshive.com logo in svg

KSB BOA-Control PIC, Руководство по эксплуатации

Поделиться
Скачать
KSB BOA-Control PIC Скачать руководство пользователя страница 11

3 Transport/Storage/Disposal

11 of 36

BOA-Control PIC

7138.8/01-EN

3 Transport/Storage/Disposal

3.1 Checking the condition upon delivery

1. On transfer of goods, check each packaging unit for damage.

2. In the event of in-transit damage, assess the exact damage, document it and

notify KSB or the supplying dealer and the insurer about the damage in writing
immediately.

3.2 Transport

The valves are delivered in cardboard boxes.

 DANGER

The valve could slip out of the suspension arrangement

Danger to life from falling parts!

▷

Only transport the valve in the specified position.

▷

Never attach lifting accessories to the handwheel.

▷

Observe the information on weights, centre of gravity and fastening points.

▷

Observe the applicable local accident prevention regulations.

▷

Use suitable, permitted lifting accessories, e.g. self-tightening lifting tongs.

▷

For actuated valves observe the relevant actuator operating manual. Transport
aids on the actuator are not suitable for suspending the entire valve/actuator
assembly.

CAUTION

Improper transport

Damage to the valve!

▷

Always transport the valve properly and in its original packaging.

▷

Protect the valve in its cardboard box from heavy impacts.

▷

Do not throw the valve.

CAUTION

Improper transport

Damage to pressure measurement connection branches or piping!

Measuring impossible

No valve function!

▷

Do not use lifting accessories in the area of the pressure measurement
connection branches or piping.

To transport valves with flanged ends from DN 65, suspend them from the lifting
tackle as shown.

Содержание BOA-Control PIC





































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды