Amamix
- direct
8
4.3
Installing the Guide Rail Retaining Bracket
Using u bolts and lock nuts, mount the retaining brackets to the
guide pipe in such a way that the mixer axis is at the specified
height.
Observe the minimum distance from the floor
and the minimum liquid level above the propeller blades specified
in the mixer operation manual.
If the propeller is only partly covered by the liquid, the bearings will
be unevenly loaded, the mixer will be subject to increased
vibrations and the shaft bearings and mechanical seals will be
subject to premature wear.
Tightening torque
M 10 7.5 lbf - ft
M 12 45 lbf - ft
h
Hmin
4.4
Mounting the Claw to the Mixer
Screw the claw to the motor casing cover of the mixer using four
hexagon head bolts.
Tightening torques:
Amamix 215/300:
M8
13 lbf - ft
Amamix 400/500/600:
M12
45 lbf - ft
