KSB Ama-Drainer 80 Скачать руководство пользователя страница 7

Страница: 7 / 56

1 General

7 of 56

Ama-Drainer 80/100

2331.823/07-EN

1.6 Key to safety symbols/markings

Table 3:

Definition of safety symbols/markings

Symbol

Description

DANGER

DANGER

This signal word indicates a high-risk hazard which, if not avoided,
will result in death or serious injury.

WARNING

WARNING

This signal word indicates a medium-risk hazard which, if not
avoided, could result in death or serious injury.

CAUTION

CAUTION

This signal word indicates a hazard which, if not avoided, could
result in damage to the machine and its functions.

General hazard

In conjunction with one of the signal words this symbol indicates a
hazard which will or could result in death or serious injury.

Electrical hazard

In conjunction with one of the signal words this symbol indicates a
hazard involving electrical voltage and identifies information about
protection against electrical voltage.

Machine damage

In conjunction with the signal word CAUTION this symbol indicates
a hazard for the machine and its functions.

Содержание Ama-Drainer 80

























































Результаты поиска

Содержание Ama-Drainer 80

Отзывы:

Похожие инструкции для Ama-Drainer 80

Бренды по названию

Популярные бренды

KSB Ama-Drainer 80, Инструкция по установке и эксплуатации

Результаты поиска

Содержание Ama-Drainer 80

Отзывы:

Похожие инструкции для Ama-Drainer 80

Бренды по названию

Популярные бренды