POWER LINE ARRAY
P LINE OPERATING INSTRUCTIONS
7 |
P a g e
CONNECTIONS AND AMPLIFIERS
For correct wiring and controlling please check the corresponding manuals of CA 4D and/or TA 4D
with F MOD controller. Amps and controller are separately available.
KS AUDIO recommends using KS AUDIO SYSTEM
AMPS with KS AUDIO SYSTEM LOUDSPEAKERS only!
If not, it may damage parts of equipment.
KS AUDIO recommends employing "balanced input connections”.
KS recommends the use of 4 x 2,5
2
cable for all speaker to amplifier connections for optimal
performance.
Warning – be certain that all speaker cables are wired identically at each end. Two amplifiers being
bridged together can create fatal damage to the drivers. We recommend to not using any other
connectors than original Neutrik® products.
Inputs and outputs can be freely assigned via Controller, so input and output channels may vary
depending on your programming.
