8
9
35 mm speaker stands
(not included)
Playing music on your speaker
Bluetooth setup
When connected to the speaker via Bluetooth, simply find and play the music on your device and the sound will play through the speaker. Some devices may require
you to select the audio output. You should be able to do this by going to the ‘Listen via’ or ‘Play via’ menu. If unsure, please refer to your device’s manual.
To change track please use your device. To control the volume either use your device or;
•
Turn the Master volume (5) clockwise to increase the volume
•
Turn the Master volume (5) anti-clockwise to decrease the volume
auxiliary
Using the provided cable, you can connect your device directly to the speaker. To use this, simply plug the cable into the speaker’s aux-in port (3) and your device, and
then press play on your device. You will need to use your device to change track, and you can change volume either on your device, or as above.
FM radio
To use FM radio please do the following:
1. Turn the device on
2. Slide the FM On/Off button (9) to on
3. The FM radio screen (10) will now turn on
4. Extend the aerial
5. Click Search (12) and the Kingston Light will automatically scan all available channels
6. To change station short press Volume down/previous (11) or Volume up/next (13) until you find your desired station
7. Click Mute (14) to mute the radio
8. To increase volume long press Volume up/next (13)
9. To decrease volume long press Volume down/previous (11)
10. To increase volume further turn the Master volume (5) clockwise
11. To decrease volume further turn the Master volume (5) anti-clockwise
note:
You can play music via Bluetooth, auxiliary and radio at the same time, perfect if you want to mix your music.
Please note:
Your device will have an internal amplifier and if it is playing digital files like MP3s it will also have an integrated DAC (Digital Audio Converter). If you turn
the volume up to 100%, your device will be sending a distorted signal. To avoid this, and to get the best quality from the speaker, we recommend that you do not run
your device any higher than 95% volume. Some devices output higher than others, so you may need to reduce the volume if you experience distortion.
Microphone
To use a microphone please do the following:
1. Insert the microphone jack into the ¼" microphone jack (1)
2. Turn the Microphone volume control (2) clockwise to increase the volume
3. Turn the Microphone volume control (2) anti-clockwise to decrease the volume
UsB charging
– To charge your device through USB, turn the device on and insert the USB into the USB input (7)
– Insert other side of cable into your device and it will automatically charge
Using speaker stands
– If you want to use speaker stands with the Kingston Light, please make sure the pole diameter is
35 mm Simply insert the speaker stand pole into the Kingston Light’s stand base (20)
Care for your Kingston light
Please DOn’T:
•
Get the Kingston Light wet
•
Drop the Kingston Light as this will invalidate your warranty
•
Open up the Kingston Light. There are no user serviceable parts inside
•
Expose the Kingston Light to extreme temperatures or rapid changes of hot to cold or vice versa
Please DO:
•
Clean the Kingston Light with a soft dry cloth and no detergents
[continued...]
