6
7
Please read this manual carefully before use.
Box contents
•
KS Kingston Light portable sound system
•
2 x power cable ( UK and EU )
•
3.5 mm aux-in cable
•
User manual
Functions
1. ¼" microphone jack
2. Microphone volume control
3. Aux-in port
4. Disconnect button
5. Master volume
6. Battery level LED indicator
7. USB charge input
8. ‘On’ LED indicator
9. FM ON/OFF switch
10. FM radio screen
11. Volume down/previous
12. Search
13. Volume up/next
14. Mute
15. Charge light
16. ON/OFF switch
17. Power cable input
18. AC adaptor fuse
19. Bluetooth LED indicator
20. Stand base
BT-LED
AUX-IN
5 V DC
@
1.2 A
VOL –
1
2
3
4
5
7
8
11
13
12
14
6
19
9
10
AC 240 V 50/60 Hz
16
15
17
18
Instructions for use
Charging the speaker
It is recommended that you give the speaker a full charge before its first use.
1. Plug the power cable into the power cable input (17)
2. Insert the plug into a mains socket
3. The Charge light (15) will be solid green whilst charging
4. When charging is complete, the green light will go out
note:
It may take up to 4 hours before the speaker is fully charged. Please allow up to 6 hours for the first charge.
Battery level
– The battery LED indicator (6) will inform you of how much battery you have left whilst not on charge
– The battery level will differ depending on how loudly you are playing this speaker
Getting started
1. To turn the speaker on press the On/Off switch (16) to On
2. To turn the speaker off press the On/Off switch (16) to Off
3. Whilst the speaker is turned on, the ‘On’ LED indicator (8) will be solid blue
Pairing the speaker to your device
Before you can use the speaker via Bluetooth, it will need to be paired to your device. To do this:
1. Turn your device and the speaker on
2. The speaker will automatically enter pairing mode, and the Bluetooth indicator light will be flashing blue quickly
3. Turn your device’s Bluetooth ON and search for new devices
4. When the ‘KS Kingston Light’ appears in the list, select it and if asked for a passcode, enter ‘0000’
5. The speaker should then be paired to your device. Once paired the Bluetooth LED (19) will be a solid blue
note:
To re-activate pairing mode, either turn the speaker off then on again, or press the Disconnect button (4) and the light will start flashing again.
– To pair additional devices to the speaker, first make sure the Bluetooth on any devices that have already been paired to the speaker is turned off
– Then follow the above instructions from step 1
20
