DIGITAL CONNECTIONS
The ADM20 utilizes different left and right loudspeaker
cabinets. The differentiation is simple due to the dif-
ferent geometry of the speakers. The right speaker
has the name plate with the blue LED on the right,
the left speaker’s is on the left. The different geometry
is due to the directional optimisation. In this position,
the tunnel not facing the listening position, causes
far fewer reflections.
In a studio environment, a digital connection is made
by connecting
the AES signal with the Digital IN
socket of the ‘right’ speaker. The left speaker
is connected to the active Digital OUT socket
of the first speaker. The digital source must be
connected to the speaker with the ‘right digital
In’ in paramter menue.
Bild1: Right ADM20 Speaker
OVERVIEW OF THE TECHNICAL SPECIFICATION OF THE ADM20
AD / DA:
27 bit gain staging sigma delta, 64x over-sampling
Digital IN, OUT:
AES3 Format, 32 –110 KHz
XLR symmetric, active bypass connector
Analogue IN, OUT:
XLR symmetric, active bypass connector with signal selection
DSP:
High performance Sharc Processor
60 MHz, 32 bit floating point, 1500dB dynamic
1500 dB dynamic
Process:
FIRTEC ™ equalization, FIR crossover
limiter, preset equalization, user defined equalization, digital floating
point, volume control, deflection protection
Room Equalization:
2 x FIRTEC ™ preset, low and high shelving, 3 x parametric EQs,
phase shifting
Drivers:
2” ring radiator, 8” carbon bass
Output Stage:
200W + 100W MOSFET technology
Sound Pressure:
116dB cont. /122dB peak
Remote Control:
optional, with gain control and input switch.
Dimensions:
42 x 30 x 33 cm 19.7Kg
12
Содержание ADM20
Страница 15: ...PC Screen shot of the ADMControl Software...
