In connection with the ADMW, the three-way combination
of ADM20 / ADM W forms a perfectly matched studio
monitor, that can effortlessly reproduce very high
volumes across the whole transmission range from
25Hz to 20000 Hz. With its connection at the analogue
output socket of the ADM20 where the corrective signal
processing takes place, the ADMW is an integrated
component enabling all possibilities of parameter control
such as filtering, volume, digital connection etc. The KS
MOSFET output stage with its ca. 500 Watt, offers
enough reserves for the deepest and fullest bass,
distinguishing itself with a lively impulse. In this way you
can enjoy the bass section just as it was recorded with
no artificial bass generated by the loudspeaker itself.
To connect the ADMW to the ADM20:
- turn “Woofer Mode” to ON (Parameter menu of the
ADM20)
- connect the analogue output socket with the ADMW
ADMW T
HE
T
HIRD
W
AY
OVERVIEW OF THE TECHNICAL SPECIFICATION OF THE ADM W
Connection via the Analogue OUT socket of the ADM20
Analogue IN, OUT:
XLR-symmetrical, active bypass connector
Room Equalization:
per DSP in ADM20
Drivers:
2 x 10” high performance speakers
Output Stage:
400 Watt MOSFET technology
Sound Pressure:
122dB cont. / 128dB peak
(ADM20/W Stereo set-up)
Dimensions (ADM W):
65 x 30 x 90cm
42Kg
11
Содержание ADM20
Страница 15: ...PC Screen shot of the ADMControl Software...
