Krystufek PANCONTROL PAN Leckstromzange, Руководство по эксплуатации

Страница: 27 / 89

EN 11
Leakage current measurement on 2 ‐ wire and 3 ‐ wire circuits.
1. Set the rotary switch always to the
highest available range.
2. Open the jaws and insert the
conductors (2 or 3 wires) through
the jaws. Make sure the jaws are
perpendicular to the conductor.
3. Close the clamp and make sure the
tops of the jaws are tightly shut. For
optimal readings, make sure the
conductor(s) is/are positioned
centered between the jaws
.
4. Once the reading stabilizes, read
the value. Use the DATA HOLD
function if the reading is difficult to
read.
Load current measurement
1. Set the rotary switch always to the highest available range.
2. Open the jaws and insert the
conductor under test through the
jaws. Make sure the jaws are
perpendicular to the conductor.
3. Close the clamp and make sure the
tops of the jaws are tightly shut. For
optimal readings, make sure the
conductor is positioned centered
between the jaws
.
4. Once the reading stabilizes, read the value. Use the DATA HOLD
function if the reading is difficult to read.