8
9
Assembly Instructions
1. Depress the push button
located on the rear of the fork
and insert the handlebar steer
tube onto the fork. The push
button should align with the
locater hole in the handlebar
steer tube and lock the steer tube
securely in place.
2. Tighten the bolts with the
hex key (included) and wrench
(included). Tighten bolts evenly
and securely.
3. Align handlebars both
vertically and horizontally (a)
onto handlebar steer tube clamp
(b) install handlebar clamp and
hardware (c&d) and tighten evenly
and securely with the hex key and
wrench.
a
b
c
d
Remove all packaging and items from display box. Make sure power switch is
turned “OFF” before assembling scooter.
WARNING:
Using the Scooter
1.
1. Flip the Power Switch to “ON” position
2. Twist Throttle while moving to engage motor
Quick Notes:
- Try to take it easy on the throttle until you get used to it.
- Motor will NOT engage until scooter is already moving
