KRUSMAN 7023, Инструкция по установке, использованию и техническому обслуживанию, Страница: 11 / 12

11
Malfunctions / Trouble shooting
Malfunction Possible Cause Possible Remedy
The volume of water which flows Clogged shower head Clean
from the shower does not Clogged eye wash heads Clean and change filters
appear to be adequate.
The volume of water which flows Water pressure is too low, Unscrew the jet regulator and
from the eye shower does not supply line cross-section is too clean the low pressure diffuser.
appear to be adequate. small or the jet regulator is
contaminated.
Water drips continuously from Proximity switch has be moved Check correct location of the
the shower. Into an incorrect location. proximity switches.
Pump is not working Circuit breaker has been Seek Electricians assistance
tripped
The body and eye showers are This is not a malfunction. This is This is not a malfunction. This is
not stopped automatically after required by DIN. required by DIN.
use.
Cannot turn unit on after power
is connected.
Circuit breaker has been
tripped.
Seek Electricians assistance
Disposal
The shower system can be completely dismantled. The individual materials, i.e. metal, plastic,
electrical components etc., can be separated and disposed of at a recycling centre. National and local
disposal regulations must be adhered to.
Replacement Parts and Accessories
You will be provided with a replacement parts list upon request.
EC Declaration of Conformity
See attachment (only required if the safety shower system has been ordered with electrically
powered
options). All rights reserved.
Duplication, in part or in whole, is forbidden. No portion of this documentation may be reproduced in
any form whatsoever (photocopy, microfilm or any other process), nor may it be edited, duplicated
or distributed with the help of electronic systems, not even for training purposes.
All specified dimensions are approximate. Subject to change without notice. Misprints excepted.
Certificate of conformity for water bowsers
Has been delivered to the initial purchaser of the Krusman 7023 and comply with current and
pending EEC regulations for the containment of water. The tank is constructed from food quality
poly-ethane. They also comply with current D.E.T.R, Environment agency and Health and Safety
regulations.