Krups ESPRESSO AUTOMATIC SERIE EA9000, Руководство пользователя

Страница: 31 / 206

E
N
F
R
E
S
P
T
29
ENGLISH
5
n
Dispensing hot water through the steam nozzle.
n
If necessary, the machine goes into preheating mode, then begins to
dispense hot water.
n
You can modify the volume of your preparation using the arrows on
the left and right of the indicated value.
n
Press “Stop” to stop the recipe.
Important:
The production of hot water does not stop immediately after you press the
“Stop”
button
(it takes 3 to 5 seconds to stop). Press the button sufficiently early to avoid overflows.
!
4
n
Press OK. The steam nozzle then comes out of its cleaning
container to stop just above your cup.
n
You will need to modify the steam nozzle position using the + and -
symbols according to your convenience. If the steam nozzle is too high
from the bottom of the cup, there is a risk of splashing. Caution: The
nozzle must not touch the bottom of the cup either.
n
Press the OK button on the touch screen.
2
n
Choosing the volume.
n
The screen displays the last volume requested. You can modify this
volume using the arrows on the left and right of the indicated value.
3
n
Place your cup under the coffee nozzles.
n
To use a large cup (or mug), you must remove the small drip tray.
Make sure that the cup fits under the coffee nozzles without
interference.
n
The cup must be placed close to the cleaning container.
n
Caution: use a cup that matches the volume of the recipe. The
maximum height of the cup is defined by the coffee nozzles; do not
tilt the cup to place it under the coffee nozzles.
n
Caution: Do not push the frothing nozzle (11) with the cup; otherwise,
it might break off.