10
AUTOMATIC SCALE REMOVAL PROGRAM – TOTAL DURATION: ABOUT 22 MINUTES
The quantity of scale deposited depends on the hardness of the water used. The appliance will automatically warn you with a
message when you need to proceed with scale removal.
To perform the cleaning program, you will need a recipient with minimum capacity of 0.6 litres and a KRUPS F 054 (40 g)
cleaning sachet.
The scale removal program is in three parts – the scale removal cycle itself, then 2 rinsing cycles.
Press to perform cleaning at any time and then choose MAINTENANCE => OK => SCALE REMOVAL from the
menus displayed.
Caution! To benefit from the warranty conditions, it is essential to perform the appliance scale
removal cycle when the appliance tells you to do so. Be sure to follow the order of operations.
You can continue to use the appliance but you are advised to perform the operation as soon as possible.
Press the key to start the automatic
cleaning program when the “Scale removal
needed” message is displayed.
Clean the cleaning tray, the drip
tray, the coffee grounds collector
and the drip tray grid with hot
water and a liquid detergent.
Rinse the water tank
with fresh water.
Only use KRUPS scale removal products, citric acid or tartaric acid. You can obtain scale removal products from
KRUPS Service Centres. In no event must you use conventional starchy sulphonic acid or other products containing
that acid.
The manufacturer may not be held responsible for damage to the appliance through use of other products.
Be sure to complete the entire scale removal cycle to avoid any risk of intoxication.
The scale removal cycle is a discontinuous cycle. Do not put your hands under the coffee outlets during the
cycle.
Make certain to protect your work surface during scale removal cycles, especially if they are made
of marble, stone or wood.
Just follow the instructions shown on the
screen, making sure the sachet dissolves
fully.
If the coffee grounds collector is not fitted you will be warned by a message being displayed. Fit the collector
again for the cycle to continue automatically.
If a power failure occurs during the cycle, you will have to start it again right from the beginning. You will not be
able to postpone this operation.
GENERAL MAINTENANCE
Always remove the power supply cord from the socket and let your appliance cool down before cleaning it.
Do not use utensils or cleaning products likely to scratch or corrode the appliance.
Wipe the body of the appliance on the outside using a moist cloth.
If your product is equipped with our Claris - Aqua Filter System cartridge F088 - Please remove this
cartridge during the descaling operation.
