11
EN
6D – KEEP WARM
TIME
■
The default keep warm duration on your appliance is 4 hours.
To set the keep warm duration:
■
If the keep warm function has already been activated, press KEEP WARM button
(v)
once to desactivate
it.
■
If the function is not activated, press the KEEP WARM button
(v)
and set the time by pressing the HR
button
(r)
to set the hours and the MIN button
(s)
to set the minutes. The time will be automatically
confirmed after about three seconds so that the duration of the keep warm function can be selected.
Fig. 18 and 19
.
■
KEEP WARM will appear on the screen and the duration is confirmed.
■
To cancel the keep warm function, press KEEP WARM button
(v)
and KEEP WARM will disappear from
the screen.
■
You can change the keep warm duration while it is in operation by pressing the HR button
(r)
to set the
hours and the MIN button
(s)
to set the minutes. The time will be automatically set after about three
seconds.
■
To dispose of used ground coffee, remove the filter and the filter holder from the coffee maker.
Fig. 20a-b
and 21a-b.
■
Do not clean the coffee maker if it is still hot.
■
Wash the carafe, the removable filter holder and the permanent filter with warm, soapy water. You may place
the carafe in the dishwasher.
CAUTION: Do not place the carafe in the microwave.
Do not put other parts of the coffee maker into the dishwasher.
■
Clean the coffee maker with a damp cloth or sponge. Never use abrasive or strong products on any part
of the coffee maker.
■
To clean the stainless steel parts of your coffee maker, dampen a soft cloth or sponge with warm water.
Wipe carefully with a dry cloth.
■
For difficult stains, use a cloth with white vinegar.
■
Do not immerse the appliance in water or under the tap.
■
Why descale
- Limestone forms naturally in your coffee maker. Descaling preserves the coffee maker and ensures it will last
longer and provide quality coffee over time. Limestone can permanently affect the machine's performance.
Malfunctions associated with scaling will not be covered by the warranty if the product is returned.
■
When to descale
- When descaling is necessary, the CLEAN icon will appear on screen.
- However, the descaling frequency depends on the hardness of the water and the number of brew cycles. It
may be necessary to descale your coffee machine if you notice the following signs, even if the CLEAN
message does not appear on the screen : longer cycle time, excessive steaming, more noise at the end of
the cycle, stopping mid-cycle ;
this means that your machine needs to be descaled.
- Descaling should be done about once a month, depending on the hardness of the water.
How to descale your KRUPS coffee maker
■
Remove the filter cartridge.
Fig. 22*.
■
Use the KRUPS descaling solution
®
or 5 fl. oz of white vinegar diluted in 17 fl.oz of cold or water at room
temperature (or 1.5 oz of citric acid diluted in 17 fl. oz) until the crystals have completely dissolved.
Fig. 23.
■
Pour the solution into the water tank (without coffee).
Fig. 24.
■
Press the CLEAN button
(o)
and then the BREW button
(k)
to start the descaling cycle.
Fig. 25.
■
The cycle lasts for 30 min.
7. CLEANING
8. DESCALING
KR_CAFETIERE_EC322_M1_NAFTA_NC00142207_01_Mise en page 1 24/11/2017 11:00 Page11
