Kruger&Matz KMP70BT, Руководство пользователя

Страница: 11 / 28

11
Owner’s manual
English
Battery and charging
1. Before charging, make sure the earphones has been switched off.
2. Plug USB cable into the charging port of the earphones;
plug the other side of USB cable into the USB charger.
Charging will start and the red light will be on.
3. Once the charging is completed, red light will go off.
Warning:
• Use only original charging cable to charge this device, as if
otherwise it may damage the product.
• This headset uses a non-detachable built-in rechargeable
battery. In order to prevent damage, do not remove the battery.
• Voltage of charger: 5 V/100 mA.
OPERATION
Power on:
Press and hold the MF button until blue light blinks; the
earphones will issue a voice.
Pairing mode:
Press and hold the MF button until blue and red light blink
alternatively; the earphones will issue a voice.
Power off:
Press and hold the MF button until red light blinks and goes out;
the earphones will issue a voice.
Pair your headset with your mobile phone:
1. Keep the devices within their operational range.
2. Turn on the earphones.
3. Press and hold the MF button until blue and red light blinks
alternatively to enter Bluetooth pairing mode; the device will
enter pairing mode.