Kruger&Matz KM1663, Руководство пользователя, Страница: 25 / 84

25
Owner’s manual
EN
PLAY FROM AN EXTERNAL DEVICE/AUXILIARY EQUIPMENT
You can listen to an audio device through this unit.
1. Connect the external audio device to AUDIO IN/AUX IN socket on this unit with an
audio cable (not supplied).
2. Press corresponding AUDIO IN/AUX IN button to select the audio input.
3. Start to play the device.
Note: You can program a maximum of 20 preset radio stations.
Press and hold the PROG button to activate automatic programming.
• [AUTO] is displayed briefly.
• All available stations are programmed in the order of waveband reception strength.
• The first programed radio station is broadcast automatically.
Note: You can program a maximum of 20 preset radio stations.
1. Tune to a radio station.
2. Press the
PROG
button to activate programming. The PROG begins to blink, press
it again to confirm, the preset number and the frequency of the preset station are
displayed.
3. Repeat the previous steps to program other stations.
Note: To overwrite a programmed station, store another station in its place.
Press / button on the front panel ( or remote control) to select a preset number.
LISTEN TO FM RADIO
Tune to FM radio station
Program radio stations automatically
Tune to a preset radio station
Program radio stations manually
1. Press FM button to select FM tuner.
2. Press and hold / button on the front panel (or on the remote control), the radio
tunes to a first station automatically.
3. Repeat step 2 to tune to more stations. To tune to a station manually, press the /
button repeatedly until you find desired frequency.
Note: In tuner mode, you can press ST button repeatedly to switch between [STEREO]
or [MONO].
Show RDS information
RDS (Radio Data System) is a service that allows FM stations to show additional
information. If you tune to an RDS station, an RDS icon and the station name are displayed.