EN
20
Owner’s manual
6. uning in to a Station:
1. When the device is
ON
, repeatedly press
SOURCE
button
to select the FM source.
2. Select a station using one of the following methods:
• Auto Tuning:
Press and hold the
buttons for one
second or more, the frequency changes down or up
automatically until a station is found.
• Manual Tuning:
Repeatedly press the
buttons to
change the frequency until you find the station you want.
To select a preset radio station, repeatedly press the
or buttons to select the desired preset number. Its
band and frequency are displayed on the front panel. You
can program a maximum of 20 preset radio stations.
7. Automatically:
While in FM mode, press and hold the
SET
button for
two second or more to activate automatic program
mode.
[AUTO]
is displayed. All available stations are
programmed. The first programmed radio station is
broadcast automatically.
8. Manually:
1. Tune to a radio station.
2. Press the
SET
button to activate program mode. The
preset number will blink.
3. Repeatedly press the or buttons to allocate a
number to this radio station.
4. Press the
SET
button again to store the station.
5. Repeat above steps 1 to 4 for each station you want to store.
