Kruger&Matz KM0814, Руководство пользователя

Страница: 22 / 52

22
Owner’s manual
EN
Setting the alarm timer
You can set two alarms which go off at
different time.
1. Ensure that you have set the clock
correctly.
2. Press and hold the ALARM1 or
ALARM2 button for 2 seconds or
more, the or and alarm source
(„ BUZZ ” or “ FM ”) will blink on the
display panel.
3. Repeatedly press the
P+
/
P-
button to
select the alarm tone ( FM or BUZZ ).
4. Press the ALARM1 / ALARM2 button to
confirm and the hour digits begin to blink.
5. Set the hour with the P+ / P- buttons.
6. Press the
ALARM1
/
ALARM2
buttons
to confirm and the minute digits begin
to blink.
7. Repeat above steps 5-6 to set the minute.
8. Repeat above steps 5-6 to select whether
to ring alarm the whole week (1-7), on
weekdays (1-5), or at weekend (6-7); and
alarm volume level of alarm tone.
To deactivate or re-activate an alarm timer:
Press the ALARM1 or ALARM2 buttons
twice in normal clock display mode to
activate alarm function and again to
deactivate it.
• If timer is activated, or is
displayed.
• If timer is deactivated, the symbols are
not displayed.