Kruger&Matz DJ-002, Руководство пользователя, Страница: 41 / 88

41
Owner’s manual
English
1. To synchronize, the title to crossfade should be monitored via headphones.
2. Start the playback and press the button SYNC of the deck to which
crossfadlng Is desired. Thus the speed and the beats of the title are precisely
matched to the title on the other deck.
3. In order to synchronize the beginnings of the 4/4 measure the large squares
of the CBG must overlap. For this use the Jog dial with activated scratch
mode: shortly before the large squares overlap, let go of the jog dial. Then
press the button SYNC for a slight correction.
4. It is also possible to use the buttons PITCH BEND to change the speed for
beat synchronization. As long as one of the buttons PITCH BEND + or - is
kept pressed, the title is played faster or slower.
12. PLAYING A CONTINUOUS LOOP SYNCHRONIZED WITH THE BEAT
A section within a title can be repeated as a seamless continuous loop as many
times as desired. These loops are synchronized with the beat of the title through
the smart loop function of the software.
1. In play mode, shortly actuate the button LOOP IN when the desired starting
point of the loop is reached.
2. Shortly actuate the button LOOP OUT when the desired end point of the
loop is reached. The section between the starting point and the end point of
the loop is continuously repeated.
3. Press the arrow buttons LOOP ADJ to adjust the loop to exactly 1, 2, 4, 8,
18 or 32 beats. Via the software's rotary control SHIFT, the loop length can
be adjusted by half length or double length increments.
4. To exit the loop and to continue the title, press the button LOOP OUT.
5. To program another loop, redefine the starting and the end point with the
buttons LOOP IN and LOOP OUT.
V. EFFECT FUNCTIONS
1. SWITCHING ON EFFECTS
1. Select the desired effect by pressing the button EFFECT SELECTOR
repeatedly. The display of the deck shows the selected effect.
2. Press the button EFFECT ON (LED lights up) to switch on the selected
effect. In the display, the selector panel is highlighted red. To switch off the
effect press the button once again (LED extinguishes).
3. Adjust the parameters of the effects as desired with the control PARAMETER 1 and 2.