Krüger & Matz KMP998BT, Руководство пользователя

Страница: 11 / 36

11
Owner’s manual
EN
Pairing
1. Make sure the earphones are powered off.
2. To enter into the pairing mode, press and hold the multifunctional
button for 6 seconds until red Led & blue Led flash alternately.
3. Activate your phone (or device) Bluetooth function and search for
external devices. You’ll see a list of available devices; find and connect
with the earphones (KMp998BT).
4. enter “0000” pIN if necessary.
Operation
• power on: press and hold multifunction button for 3 seconds. Blue Led
flashes. earphone turn on.
• power off: press and hold multifunction button for 3 seconds. Red Led
flashes, then the earphones turn off.
• volume adjust: press “
+
” or “
-
” buttons to change volume level.
• play/pause: press multifunction button to pause music playback. press
it again to resume playback.
• previous: press and hold for 2 seconds “
-
” button to go to previous track.
• Next: press and hold for 2 seconds “
+
” to go to next track.
• Answer call: press multifunction button to answer the incoming call.
• end call: short press multifunction button.
• Reject call: press and hold the multifunction button to reject a call.
• Last number redial: in standby status, press multifunction button twice
to redial the last number.
• Battery Capacity status: when earphone is connected to iOS devices, iOS
devices shows the earphone battery power status in the upper right corner.
Charging
Connect the earphones to AC charger or a computer USB port. Red Led keeps
lighting during charging. Once the charging is completed, the blue Led is on.
Note:
• use only original accessories to charge the earphones.
• charge the earphones at least once every month to keep its battery in
good condition.