Krüger & Matz KM1584CD, Руководство пользователя

Страница: 35 / 112

35
Owner’s manual
EN
7. Press the button to start playing the disc.
8. Press the button to stop playback.
Note: Play will continue to the final track when the selected tracks have been played.
The first 2 digits of the display is the album number, the next 3 digits is the track number and the
remaining digits display the minutes and seconds.
Playing Repeatedly (MP3 disc)
ONE, ALB and ALL repeat play can be set by pressing the MODe button.
First press: To repeat the same track, the words “TRK” and “REP” will blink.
Second press: To repeat playing album, the words “TRK” will stay lit and “REP ALB” will blink.
Third press: To repeat playing all tracks on a disc, the words “TRK” will stay lit and “REP ALL” will
blink.
Fourth press: To play tracks randomly, the word “SHUF” will blink.
Fifth press: Return to the normal playback state.
USe THe USB
By connecting an USB mass storage device (including USB flash memory, USB flash players or
memory cards) to this unit, you can enjoy the device’s stored music through the unit.
1. Insert the USB device’s USB plug into the socket on the front of unit.
2. Press the USB button on remote control or rotate the SOURCe select button on the Amplifier to
select the USB function. The word “USB” will be displayed on the front panel.
3. The device stored music will be played automatically.
4. When you store more than one folder in the USB flash, use the ALBUM UP or ALBUM DOWN
button on the remote control to select the next/previous folder. Then choose the track with the
/ button to play the folder.
5. The player support the USB music file format of MP3, WMA only.
For devices with USB Cables:
1. Insert one plug of the USB cable (not supplied) to the socket on the unit.
2. Insert the other plug of the USB cable to the USB output terminal of the USB device.
For memory Cards:
1. Insert the memory card into a card reader (not supplied).
2. Use a USB cable (not supplied) to connect the card reader into the socket on the unit.
USB Storage Device Data Protection
• Always insert the USB device in the correct direction. Failure to do so may result in damage to
the USB device and this unit.
• Do not remove the USB device while it is being accessed.
• Electrical interference and electrostatic discharges may cause the USB device to malfunction
and suffer damage, resulting in data loss.
It is strongly recommended that any important data is backed up on a PC to protect against
corruption, data loss or device malfunction. Please note that our company shall not accept any
liability for damage or loss of stored data.
Note: USB connection is not compatible with all hard drive models.