Krüger & Matz KM0616, Руководство пользователя

Страница: 10 / 24

10
Owner’s manual
EN
Note:
• when connecting with the same device for the second time, just
turn the headphones on, turn on the phone and enable Bluetooth
function; the headphone will connect with the device automatically.
• When in Bluetooth mode, when there is an incoming call the
headphones will switch to call automatically.
• Please note, playback time/talk time as well as Bluetooth range
depends on various numerous factors, and my differ from the
stated value.
• when sucessfully paired, LED indicator flashes blue every 2 seconds.
• If the headphones are not connected to any device, they will
automatically power off after about 5 minutes.
auX mode
To enter AUX mode, just plug in the cable. The headphones will enter AUX
mode automatically; then start the playback from the external device.
Note:
• the built-in microphone of the headphone will not work when
under the AUX mode.
• playlist management and volume control in AUX mode are available
only on the external device.
Charging
When the battery is low, the LED indicator will flash red and emit a
sound every 10 seconds. Connect the headphones to AC charger or a
computer USB port. Red LED keeps lighting during charging. Once the
charging is completed, the LED indicator turns blue.
Note:
• use only original accessories to charge the headphones.
• charge the headphones at least once every 3 months to keep its
battery in good condition.
• the headphone’s battery must be charged in order to use them
in Bluetooth mode. However, when using in AUX mode, the
headphones will work even if the battery is empty.